Scoring Tables 7’x6’ - $350.00
Aluminum Benches, Scoring tables & Bleacher Mounted Scoring Platforms
1. Benches
Standard Sizes, 7’6”, 15’0”, 21’0”, SPECIAL ORDER 27’0” other sizes on request, Benches come with backs, or without backs
NET SEATING: 7’6”/5 seats, 12’0”/ 8 seats,
Based on an 18” seat
2. Scoring tables
Standard Sizes, 7’6”, 9’0”, 12’0” other sizes on request,
Scoring table come with aluminum bench seat & Table top
NET SEATING: 7’6”/5 seats, 9’0”/ 6 seats, 12’0”/ 8 SEATS
Based on an 18” seat
3. Bleacher Mounted Scoring Platforms
Standard Sizes, 6’0” x 7’6”, 6’0” x 9’0”, 6’0” x 12’0” other sizes on request,
Bleacher mounted Scoring Platform,
Comes with aluminum Platform, legs, Galvanized hardware and Safety Railing, Scoring table optional
NET SEATING: 7’6”/5 seats, 9’0”/ 6 seats, 12’0”/ 8 SEATS
Based on an 18” seat
Fabrication – Live Load / Codes / References
1. 100-p.s.f gross horizontal projection
2. Lateral sway load: 24 p.1.f seat plank
3. Perpendicular sway load: 10 p.1.f seat plank
4. Wind load: 30 p.s.f vertical projection
5. Live load of seat and tread plank: 120 p.1.f minimum
6. Guardrail, Handrail & Intermediate rail
A. Handrail assemblies and guards shall be able to resist a single concentrated load of 200 pounds, applied in any direction at any point along the top and have attachment devices and supporting structure to transfer this loading to appropriate structural elements of the grandstand / bleacher.
B. Intermediate rails (all those except the handrail), balusters and panel fillers shall be designed to withstand a horizontally applied normal load of 50 pounds on an area equal to 1 square foot, including openings and space between rails.
7. Meets or exceeds design load and safety standards set by ICC, UBC, SBCCI, BOCA,SBC, 2006 NFPA 101 & 102, F.B.C. 425 (SREF), Aluminum Association of America, Federal ADA Requirements and Florida Fire Safety in Educational Facilities Rule 69A-58. American Welding Society (AWS), American Society for Testing and Materials (ASTM) & American Society of Civil Engineers (ASCE).
Understructure – Aluminum Frame Structure:
1. Understructure shall be fabricated from 6061-T6 & 6063-T6 alloy aluminum extrusions, or on request galvanized steel.
2. Framework: 2” x 2” x 3/16” aluminum angle, galvanized steel angle
3. 1 ½” x 1 ½”x 3/16” make up cross bracing and straight bracing.
4. The understructure shall be assembled from the above items and assembled with hot dipped galvanized fasteners, stainless steel on special request.
1. Guardrail Systems
36” aluminum vertical picket guard rail system on scoring platform.
2. Guardrail shall be nominal 1 5/8” extruded aluminum channeled pipe. All rails shall be secured to angle supports with R-bands and through-bolt fastening to 3” x 2” x 3/16” aluminum angle post.
3. The guardrail system contains (2) nominal 1 5/8” extruded channeled pipe, 6061-T6 aluminum (1) top rail and (1) bottom rail. Top rail at 42” above any walk able surface or mid-point of seat plank. Bottom rail is located so that a maximum of 4” sphere cannot pass through the triangle created by the bottom rail, rider board and tread plank.
4. Standard ¾” x ¾” aluminum vertical picket guard rail welded to both the top & bottom 1 5/8” O.D. extruded aluminum channeled pipe, ending with either an aluminum pipe fitting of aluminum pipe caps.
1. Bench aluminum extrusions Seats & Backs
A. Seat & Back planks shall be 6063-T6 extruded aluminum with a fluted, nonskid surface and a minimum wall thickness of nominal .078”.
B. Seat planks shall be nominal 2” x 10” or 2” x 12” on request, Anodized or silver powder coated
C. Back planks shall be nominal 2” x 5” or 2” x 10” on request, Anodized or silver powder coated
D. Seat & Back planks shall attach with 3.5”or 2’0” aluminum clips with galvanized carriage bolt and nut.
2. Platform Footboards
E. Footboard planks shall be 6063-T6 extruded aluminum with a fluted, nonskid surface and a minimum wall thickness of nominal .078” Platform planks shall attach with 3.5”or 2’0” aluminum clips with galvanized carriage bolt and nut.
Aisles/ NOT NEEDED
Hardware
1. All nuts and bolts: galvanized per ASTM-153/ or on special request stainless steel
2. Hold down clips and plank connection inserts: 6061-T6 aluminum alloy
3. Primary connections, cross-bracing and handrail shall be made with a minimum of 3/8” diameter hardware bolts
4. End caps: End caps for seat board shall be extruded aluminum and secure with aluminum pop rivet or welded.
Mud Sills
1. 2” x 6” x 36” treated wooden studs, available on request, and 3/8” galvanized fasteners.
Concrete Mounted Benches Fasteners/ Concrete Anchors
½” x 3 ¾ galvanized power or wedge anchors to be drilled and anchored into concrete slab or foundation to meet required State & Local anchoring requirements.
Warranty:
a. The manufacturer shall warrant all assembly work performed under these specifications to be free of defects for a period of one year when installed by a trained SES installer.
b. Any materials found to be defective within one year shall be replaced at no cost to the owner.
c. Acts of vandalism or abuse shall render the conditions of this warranty null and void.
d. Any exposed mill finished aluminum surface that may become discolored, which is caused when mill finish aluminum gets damp for water either during normal freighting or site installation resulting in oxidation called Mill Stain, this is a natural phenomenon and will ultimately fad. Bleacher manufacturer will not be responsible for this type of discoloration due to oxidation or Mill Stain when dealing with mill finish aluminum.
EverWearProducts By Southeastern Seating, Inc.
903 E. 17th Avenue
Tampa, FL 33605
Phone: (800) 248-2099
Fax: (813) 273-9196